01STRUCTURALSTEEL.AI

BSI · STANDARD

BS
EN 1991-1-1

Eurocode 1: Actions on structures — Densities, self-weight and imposed loads

§ 01

Overview

What this standard covers

The companion loading code to Eurocode 3, giving densities, self-weight and imposed floor and roof loads.

The companion loading code to Eurocode 3, giving densities, self-weight and imposed floor and roof loads.

Who uses it

Structural engineers and checkers verifying member, connection and stability resistance.

§ 02

Details

Reference data

Standard number
BS EN 1991-1-1
Title
Eurocode 1: Actions on structures — Densities, self-weight and imposed loads
Organisation
BSI
Country
United Kingdom
Region
United Kingdom
Subject
Design codes
Subcategory
Loading
Type
STANDARD
Application
Mandatory
Availability
Paid
Status
CURRENT
Roles
design standard
Last verified
2026-09-06

Official source: knowledge.bsigroup.com

§ 03

Related

Standards used alongside this one

  • BS EN 1993-1-1

    Eurocode 3: Design of steel structures — General rules and rules for buildings

    The core UK design code for steel buildings: cross-section classification, member resistance, buckling and global analysis, used with the UK National Annex.

    United KingdomDesign codesCURRENTPaid

  • Abu Dhabi IBC

    Abu Dhabi International Building Code

    Abu Dhabi's adaptation of the International Building Code, which brings AISC 360 and IBC special inspection requirements into local law.

    United Arab EmiratesDesign codesCURRENTFree

  • AISC 341

    Seismic Provisions for Structural Steel Buildings

    Requirements for seismic force resisting systems, protected zones, demand critical welds and member ductility.

    United StatesDesign codesCURRENTFree

  • AISC 360

    Specification for Structural Steel Buildings

    The US design specification for steel buildings, covering LRFD and ASD member and connection design; adopted by reference in the International Building Code.

    United StatesDesign codesCURRENTFree

  • BS EN 1993-1-2

    Eurocode 3: Structural fire design

    Verification of steel members at elevated temperature, covering material degradation, section factors and the basis for fire protection thickness.

    United KingdomDesign codesCURRENTPaid

  • BS EN 1993-1-5

    Eurocode 3: Plated structural elements

    Rules for plate buckling, stiffener design, shear and patch loading in plate girders and fabricated sections.

    United KingdomDesign codesCURRENTPaid

Sourcing, review and use

Status

Editorial reference information compiled and maintained by the StructuralSteel.ai team. It is not a design certificate and is not issued under an engineer's seal.

Last reviewed

Calculations

Any figures produced on this page are indicative estimates for early sizing and comparison only — they are not engineered design outputs.

Final member selection, loading, connection design, fire design, fabrication and compliance must be verified for your specific project by a suitably qualified structural engineer. Standards are revised; check the edition in force where the work is built.

Verification

StructuralSteel.ai provides technical reference information and links to authoritative sources. Project specifications, applicable legislation, current standards editions and requirements of the responsible engineer or authority should always be verified before fabrication or supply.