§ Standards
Status
CURRENT
Last verified
2026-09-06
ISO · STANDARD
ISO 6892-1
Metallic materials — Tensile testing at room temperature
Overview
What this standard covers
The tensile test method behind the yield and tensile values reported on a mill certificate.
The tensile test method behind the yield and tensile values reported on a mill certificate.
Who uses it
Specifiers, buyers and mills confirming what a grade guarantees before it is ordered or substituted.
Details
Reference data
- Standard number
- ISO 6892-1
- Title
- Metallic materials — Tensile testing at room temperature
- Organisation
- ISO
- Country
- International
- Region
- international
- Subject
- Materials
- Subcategory
- Testing
- Type
- STANDARD
- Application
- Contractual
- Availability
- Paid
- Status
- CURRENT
- Roles
- material standard
- Last verified
- 2026-09-06
Official source: iso.org
Related
Standards used alongside this one
- ISO 148-1
Metallic materials — Charpy pendulum impact test
The Charpy impact test that determines whether a grade meets its J2, K2 or equivalent toughness sub-grade.
InternationalMaterialsCURRENTPaid
- BS EN 10204
Metallic products — Types of inspection documents
Defines the certificate types: 2.1 and 2.2 as non-specific declarations, 3.1 issued by the manufacturer's independent inspection function, and 3.2 countersigned by an independent party.
United KingdomMaterial certificatesCURRENTPaid
- ASTM A36/A36M
Carbon Structural Steel
The long established 36 ksi carbon structural grade, still common for plate, angle and channel.
United StatesMaterialsCURRENTPaid
- ASTM A370
Test Methods and Definitions for Mechanical Testing of Steel Products
How tensile, bend and impact tests on steel products are performed and reported — the basis of the values printed on a US mill certificate.
United StatesMaterialsCURRENTPaid
- ASTM A500/A500M
Cold-Formed Welded and Seamless Carbon Steel Structural Tubing
The usual US HSS specification for round, square and rectangular tubing, with grades B and C in common use.
United StatesMaterialsCURRENTPaid
- ASTM A501/A501M
Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
Hot formed structural tubing, the closest US equivalent to hot finished EN 10210 hollow sections.
United StatesMaterialsCURRENTPaid
Sourcing, review and use
Status
Editorial reference information compiled and maintained by the StructuralSteel.ai team. It is not a design certificate and is not issued under an engineer's seal.
Last reviewed
Calculations
Any figures produced on this page are indicative estimates for early sizing and comparison only — they are not engineered design outputs.
References
Final member selection, loading, connection design, fire design, fabrication and compliance must be verified for your specific project by a suitably qualified structural engineer. Standards are revised; check the edition in force where the work is built.
Verification
StructuralSteel.ai provides technical reference information and links to authoritative sources. Project specifications, applicable legislation, current standards editions and requirements of the responsible engineer or authority should always be verified before fabrication or supply.