§ Standards
Status
CURRENT
Last verified
2026-09-06
BSI · STANDARD
BS EN
ISO 14731
Welding coordination — Tasks and responsibilities
Overview
What this standard covers
Defines the technical knowledge and responsibilities of the responsible welding coordinator required under EN 1090-2 and ISO 3834.
Defines the technical knowledge and responsibilities of the responsible welding coordinator required under EN 1090-2 and ISO 3834.
Who uses it
Welding coordinators, welders and inspectors qualifying procedures and demonstrating weld quality.
Details
Reference data
- Standard number
- BS EN ISO 14731
- Title
- Welding coordination — Tasks and responsibilities
- Organisation
- BSI
- Country
- United Kingdom
- Region
- United Kingdom
- Subject
- Welding
- Subcategory
- Coordination
- Type
- STANDARD
- Application
- Contractual
- Availability
- Paid
- Status
- CURRENT
- Roles
- welding standard
- Last verified
- 2026-09-06
Official source: knowledge.bsigroup.com
Related
Standards used alongside this one
- BS EN ISO 3834-2
Quality requirements for fusion welding — Comprehensive quality requirements
The comprehensive tier of welding quality requirements, normally required for EXC3 and EXC4 work, covering welding coordination, records and control of consumables.
United KingdomQuality & certificationCURRENTPaid
- AWS A5.1
Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
Classification of SMAW electrodes such as E7018, defining strength, position and hydrogen level.
United StatesWeldingCURRENTPaid
- AWS A5.18
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
Solid wire classification for MIG/MAG welding, including ER70S-6.
United StatesWeldingCURRENTPaid
- AWS A5.20
Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
Flux cored wire classification widely used for structural shop and site welding.
United StatesWeldingCURRENTPaid
- AWS D1.1
Structural Welding Code — Steel
The US structural welding code: prequalified joints, welding procedure and welder qualification, workmanship, and visual and NDT acceptance criteria for statically and cyclically loaded work.
United StatesWeldingCURRENTPaid
- AWS D1.5
Bridge Welding Code
Welding requirements for highway bridge steelwork, with tighter fracture control provisions than D1.1.
United StatesWeldingCURRENTPaid
Sourcing, review and use
Status
Editorial reference information compiled and maintained by the StructuralSteel.ai team. It is not a design certificate and is not issued under an engineer's seal.
Last reviewed
Calculations
Any figures produced on this page are indicative estimates for early sizing and comparison only — they are not engineered design outputs.
References
Final member selection, loading, connection design, fire design, fabrication and compliance must be verified for your specific project by a suitably qualified structural engineer. Standards are revised; check the edition in force where the work is built.
Verification
StructuralSteel.ai provides technical reference information and links to authoritative sources. Project specifications, applicable legislation, current standards editions and requirements of the responsible engineer or authority should always be verified before fabrication or supply.