§ Standards
Entries
17
Subject
Structural
welding standards
Welding standards govern procedure qualification, welder approval, consumables, preheat, distortion control and weld quality levels. Two families dominate worldwide: the ISO/EN family used with EN 1090-2, and AWS D1.1 used with American practice.
Index
Standards in Welding
17 of 17 entries
- AWS A5.1
Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
Classification of SMAW electrodes such as E7018, defining strength, position and hydrogen level.
United StatesWeldingCURRENTPaid
- AWS A5.18
Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
Solid wire classification for MIG/MAG welding, including ER70S-6.
United StatesWeldingCURRENTPaid
- AWS A5.20
Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
Flux cored wire classification widely used for structural shop and site welding.
United StatesWeldingCURRENTPaid
- AWS D1.1
Structural Welding Code — Steel
The US structural welding code: prequalified joints, welding procedure and welder qualification, workmanship, and visual and NDT acceptance criteria for statically and cyclically loaded work.
United StatesWeldingCURRENTPaid
- AWS D1.5
Bridge Welding Code
Welding requirements for highway bridge steelwork, with tighter fracture control provisions than D1.1.
United StatesWeldingCURRENTPaid
- AWS D1.8
Structural Welding Code — Seismic Supplement
Supplementary welding requirements for seismic applications, including demand critical welds and filler metal toughness.
United StatesWeldingCURRENTPaid
- BS EN ISO 14731
Welding coordination — Tasks and responsibilities
Defines the technical knowledge and responsibilities of the responsible welding coordinator required under EN 1090-2 and ISO 3834.
United KingdomWeldingCURRENTPaid
- BS EN ISO 15609-1
Specification and qualification of welding procedures — Welding procedure specification
The content required in a welding procedure specification: joint preparation, consumables, current, preheat, interpass and run sequence.
United KingdomWeldingCURRENTPaid
- BS EN ISO 15614-1
Specification and qualification of welding procedures — Arc and gas welding of steels
Welding procedure qualification testing that produces the WPQR underpinning each approved WPS, including test pieces and ranges of approval.
United KingdomWeldingCURRENTPaid
- BS EN ISO 5817
Welding — Quality levels for imperfections in fusion-welded joints in steel
Quality levels B, C and D used as the acceptance basis for weld imperfections; EN 1090-2 links the required level to the execution class.
United KingdomWeldingCURRENTPaid
- BS EN ISO 9606-1
Qualification testing of welders — Fusion welding of steels
Welder approval testing, the ranges of approval each test covers, and the validity and prolongation of certificates.
United KingdomWeldingCURRENTPaid
- EN ISO 5817
Quality levels for imperfections in fusion-welded joints in steel
Weld acceptance quality levels B, C and D, referenced directly by EN 1090-2 for each execution class.
European UnionWeldingCURRENTPaid
- GB 50661
Code for Welding of Steel Structures
Chinese welding requirements for steel structures, including procedure qualification, welder approval and weld inspection classes.
ChinaWeldingCURRENTPaid
- IS 814
Covered Electrodes for Manual Metal Arc Welding of Carbon and Carbon Manganese Steel
Classification and requirements for covered welding electrodes used in Indian structural work.
IndiaWeldingCURRENTPaid
- IS 816
Code of Practice for Use of Metal Arc Welding for General Construction in Mild Steel
General arc welding practice for mild steel construction, including joint types and workmanship.
IndiaWeldingCURRENTPaid
- IS 9595
Metal Arc Welding of Carbon and Carbon Manganese Steels — Recommendations
Recommended welding procedures, preheat and consumable selection for carbon and carbon manganese steels.
IndiaWeldingCURRENTPaid
- JIS Z 3801
Standard Qualification Procedure for Manual Welding Technique
Japanese welder qualification testing used alongside the national fabricator grading system.
JapanWeldingCURRENTPaid
Verification
StructuralSteel.ai provides technical reference information and links to authoritative sources. Project specifications, applicable legislation, current standards editions and requirements of the responsible engineer or authority should always be verified before fabrication or supply.