01STRUCTURALSTEEL.AI

Enterprise Singapore · STANDARD

SS
EN 1993-1-1

Eurocode 3 with Singapore National Annex

§ 01

Overview

What this standard covers

Singapore's adoption of Eurocode 3 with a National Annex setting local parameters, mandatory for building plan approval.

Singapore's adoption of Eurocode 3 with a National Annex setting local parameters, mandatory for building plan approval.

Who uses it

Structural engineers and checkers verifying member, connection and stability resistance.

§ 02

Details

Reference data

Standard number
SS EN 1993-1-1
Title
Eurocode 3 with Singapore National Annex
Organisation
Enterprise Singapore
Country
Singapore
Region
Far East
Subject
Design codes
Subcategory
General design
Type
STANDARD
Application
Mandatory
Availability
Paid
Status
CURRENT
Roles
design standard
Last verified
2026-09-06

Official source: singaporestandardseshop.sg

§ 03

Related

Standards used alongside this one

  • SS EN 1090-2

    Execution of steel structures — Singapore adoption

    Singapore's adoption of the European execution standard, including execution classes and fabricator requirements.

    SingaporeFabricationCURRENTPaid

  • BCA requirements

    Building and Construction Authority structural steel requirements

    Singapore's plan approval, accredited fabricator and independent checking requirements for structural steelwork.

    SingaporeQuality & certificationCURRENTFree

  • Abu Dhabi IBC

    Abu Dhabi International Building Code

    Abu Dhabi's adaptation of the International Building Code, which brings AISC 360 and IBC special inspection requirements into local law.

    United Arab EmiratesDesign codesCURRENTFree

  • AISC 341

    Seismic Provisions for Structural Steel Buildings

    Requirements for seismic force resisting systems, protected zones, demand critical welds and member ductility.

    United StatesDesign codesCURRENTFree

  • AISC 360

    Specification for Structural Steel Buildings

    The US design specification for steel buildings, covering LRFD and ASD member and connection design; adopted by reference in the International Building Code.

    United StatesDesign codesCURRENTFree

  • BS EN 1991-1-1

    Eurocode 1: Actions on structures — Densities, self-weight and imposed loads

    The companion loading code to Eurocode 3, giving densities, self-weight and imposed floor and roof loads.

    United KingdomDesign codesCURRENTPaid

Sourcing, review and use

Status

Editorial reference information compiled and maintained by the StructuralSteel.ai team. It is not a design certificate and is not issued under an engineer's seal.

Last reviewed

Calculations

Any figures produced on this page are indicative estimates for early sizing and comparison only — they are not engineered design outputs.

Final member selection, loading, connection design, fire design, fabrication and compliance must be verified for your specific project by a suitably qualified structural engineer. Standards are revised; check the edition in force where the work is built.

Verification

StructuralSteel.ai provides technical reference information and links to authoritative sources. Project specifications, applicable legislation, current standards editions and requirements of the responsible engineer or authority should always be verified before fabrication or supply.