§ Standards
Status
CURRENT
Last verified
2026-09-06
UAE Ministry of Interior — Civil Defence · CODE
UAE Fire and Life
Safety Code
UAE Fire and Life Safety Code of Practice
Overview
What this standard covers
National fire requirements that drive steel fire protection ratings and material approvals across the Emirates.
National fire requirements that drive steel fire protection ratings and material approvals across the Emirates.
Who uses it
Structural engineers and checkers verifying member, connection and stability resistance.
Details
Reference data
- Standard number
- UAE Fire and Life Safety Code
- Title
- UAE Fire and Life Safety Code of Practice
- Organisation
- UAE Ministry of Interior — Civil Defence
- Country
- United Arab Emirates
- Region
- Middle East
- Subject
- Design codes
- Subcategory
- Fire
- Type
- CODE
- Application
- Mandatory
- Availability
- Free
- Status
- CURRENT
- Roles
- design standard
- Last verified
- 2026-09-06
Official source: moi.gov.ae
Related
Standards used alongside this one
- Dubai Building Code
Dubai Building Code — structural requirements
Dubai's consolidated building code, which recognises international design codes and sets local requirements for approval and inspection.
United Arab EmiratesDesign codesCURRENTFree
- Abu Dhabi IBC
Abu Dhabi International Building Code
Abu Dhabi's adaptation of the International Building Code, which brings AISC 360 and IBC special inspection requirements into local law.
United Arab EmiratesDesign codesCURRENTFree
- AISC 341
Seismic Provisions for Structural Steel Buildings
Requirements for seismic force resisting systems, protected zones, demand critical welds and member ductility.
United StatesDesign codesCURRENTFree
- AISC 360
Specification for Structural Steel Buildings
The US design specification for steel buildings, covering LRFD and ASD member and connection design; adopted by reference in the International Building Code.
United StatesDesign codesCURRENTFree
- BS EN 1991-1-1
Eurocode 1: Actions on structures — Densities, self-weight and imposed loads
The companion loading code to Eurocode 3, giving densities, self-weight and imposed floor and roof loads.
United KingdomDesign codesCURRENTPaid
- BS EN 1993-1-1
Eurocode 3: Design of steel structures — General rules and rules for buildings
The core UK design code for steel buildings: cross-section classification, member resistance, buckling and global analysis, used with the UK National Annex.
United KingdomDesign codesCURRENTPaid
Sourcing, review and use
Status
Editorial reference information compiled and maintained by the StructuralSteel.ai team. It is not a design certificate and is not issued under an engineer's seal.
Last reviewed
Calculations
Any figures produced on this page are indicative estimates for early sizing and comparison only — they are not engineered design outputs.
References
Final member selection, loading, connection design, fire design, fabrication and compliance must be verified for your specific project by a suitably qualified structural engineer. Standards are revised; check the edition in force where the work is built.
Verification
StructuralSteel.ai provides technical reference information and links to authoritative sources. Project specifications, applicable legislation, current standards editions and requirements of the responsible engineer or authority should always be verified before fabrication or supply.