100 x 100 x 10 Mild Steel Equal Angle S275
The 100 x 100 x 10 Mild Steel Equal Angle S275 is an equal-leg angle measuring 100 × 100 mm — an L-profile with both legs the same length, giving symmetric stiffness in the two obvious directions. Connected through one leg only, an angle carries load eccentrically. Codes handle this with a reduced effective area, so a single-bolt cleat is worth checking rather than assuming.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 15 kg per metre, one tonne buys roughly 66.7 linear metres. It is heavy enough to need mechanical handling on site, but light enough that a standard HIAB offload covers delivery in one visit. Standard supply is S275 to BS EN 10056-1, with fabrication carried out here before dispatch. Every order carries EN 10204 3.1 mill certification and is CE marked under BS EN 1090 EXC 3.
Typically specified for cross-bracing, cleats and connection angles, masonry support and edge protection, lightweight trusses and frame stiffeners.
For external work, hot-dip galvanising after cutting and drilling avoids exposing bare steel at every hole.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
100 x 100 x 10 Mild Steel Equal Angle S275,
answered.
Common questions about the 100 x 100 x 10 Mild Steel Equal Angle S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 15 kg per linear metre, so a tonne is approximately 66.7 metres. A 6 m length comes to about 90 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 100 x 100 x 10 Mild Steel Equal Angle S275