100 X 50 X 10.0 kg PFC Mild Steel Channel S275
The 100 X 50 X 10.0 kg PFC Mild Steel Channel S275 is a hot-rolled channel measuring 100 × 50 mm, with parallel inner flange faces so washers and plates seat flat without taper packs. Used in pairs either side of a timber member, channels form a very effective flitch arrangement without the through-bolting depth a plate would demand.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 10.2 kg per metre, one tonne buys roughly 98 linear metres. At this weight the section is a genuine two-person lift over short distances, so it suits refurbishment work, tight access and sites without craneage. Stock grade is S275 to BS EN 10025-2; other grades are rolled to order. Certification is EN 10204 3.1 as standard, and fabricated items are CE marked under BS EN 1090 EXC 3.
Typically specified for cladding and sheeting rails, flitch beams around timber, lift shaft framing, agricultural building purlins and kerb and trench edging.
Tell us which flange face must remain clear — we set out the drilling from that datum rather than from the section centreline.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
100 X 50 X 10.0 kg PFC Mild Steel Channel S275,
answered.
Common questions about the 100 X 50 X 10.0 kg PFC Mild Steel Channel S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 10.2 kg per linear metre, so a tonne is approximately 98 metres. A 6 m length comes to about 61 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 100 X 50 X 10.0 kg PFC Mild Steel Channel S275