12 x 45 x 4.24 kg Flatbar S275
12 x 45 x 4.24 kg Flatbar S275 is a mild steel flat measuring 12 × 45 mm, used as plate stock for splices, packers, gussets and flitch work. Bolt spacing and edge distance are what govern a flitch design far more often than the steel section itself — the plate is only as good as the bolt group transferring load into it.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 4.24 kg per metre, one tonne buys roughly 235.8 linear metres. Light enough to be manoeuvred through existing openings, it is a common choice where a crane simply cannot reach the working face. Supplied in grade S275 to BS EN 10025-2, cut to your lengths and delivered worldwide. Heat numbers are traceable back to the rolling mill, with EN 10204 3.1 certificates issued against each delivery.
Typically specified for splice and gusset plates, base and cap plates, packers and shims, stiffeners to existing steel and bracing straps.
Plates are supplied square-cut as standard; radiused corners and slotted holes are available on request.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
12 x 45 x 4.24 kg Flatbar S275,
answered.
Common questions about the 12 x 45 x 4.24 kg Flatbar S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 4.24 kg per linear metre, so a tonne is approximately 235.8 metres. A 6 m length comes to about 25 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 12 x 45 x 4.24 kg Flatbar S275