150 x 150 x 12 Mild Steel Equal Angle S355
The 150 x 150 x 12 Mild Steel Equal Angle S355 is an L-section measuring 150 × 150 mm with matched legs, commonly cut short and used many times over on the same job. Used in pairs either side of a gusset, angles become far more efficient because the eccentricity largely cancels out.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 27.3 kg per metre, one tonne buys roughly 36.6 linear metres. This is a mid-weight member: comfortable for a telehandler or small mobile crane, and heavy enough to carry meaningful load without doubling up. Stock grade is S355 to BS EN 10056-1; other grades are rolled to order. Certification is EN 10204 3.1 as standard, and fabricated items are CE marked under BS EN 1090 EXC 3.
Typically specified for gate and railing fabrication, corner and nosing trims, cross-bracing, cleats and connection angles and masonry support and edge protection.
Where angles are used as cleats, send us the hole pattern rather than the finished drawing — the cutting list is what we work from.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
150 x 150 x 12 Mild Steel Equal Angle S355,
answered.
Common questions about the 150 x 150 x 12 Mild Steel Equal Angle S355 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 27.3 kg per linear metre, so a tonne is approximately 36.6 metres. A 6 m length comes to about 164 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 150 x 150 x 12 Mild Steel Equal Angle S355