193.7 x 10.0 Circular Hollow Section S355
193.7 x 10.0 Circular Hollow Section S355 is a CHS, a seamless-looking tubular member equally stiff in every direction. The trade-off is connection: circular ends need profiling, coping or a flange plate rather than a simple flat bolted joint, so fabrication cost is higher than for an equivalent open section.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 45.3 kg per metre, one tonne buys roughly 22.1 linear metres. At this weight, lifting is a planned operation — allow for crane capacity, slinging points and safe laydown before the delivery arrives. Supplied in grade S355 to BS EN 10210 / BS EN 10219, cut to your lengths and delivered worldwide. Heat numbers are traceable back to the rolling mill, with EN 10204 3.1 certificates issued against each delivery.
Typically specified for canopy supports, bracing in exposed frames, roller and shaft sleeves, exposed architectural columns and handrails and balustrade posts.
Tube ends left open will collect water; specify cap plates or drain holes on anything exposed to the weather.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
193.7 x 10.0 Circular Hollow Section S355,
answered.
Common questions about the 193.7 x 10.0 Circular Hollow Section S355 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 45.3 kg per linear metre, so a tonne is approximately 22.1 metres. A 6 m length comes to about 272 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 193.7 x 10.0 Circular Hollow Section S355