193.7 x 6.0 Circular Hollow Section S355
Rolled and welded as a circular hollow section, the 193.7 x 6.0 Circular Hollow Section S355 combines structural efficiency with a clean visual line. The trade-off is connection: circular ends need profiling, coping or a flange plate rather than a simple flat bolted joint, so fabrication cost is higher than for an equivalent open section.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 29.1 kg per metre, one tonne buys roughly 34.4 linear metres. This is a mid-weight member: comfortable for a telehandler or small mobile crane, and heavy enough to carry meaningful load without doubling up. Held in S355 to BS EN 10210 / BS EN 10219 and cut to length before it leaves the yard. Mill certificates accompany every load, and any fabrication is executed under our BS EN 1090 EXC 3 factory production control.
Typically specified for tubular trusses, bollards and street furniture, canopy supports, bracing in exposed frames and roller and shaft sleeves.
Tube ends left open will collect water; specify cap plates or drain holes on anything exposed to the weather.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
193.7 x 6.0 Circular Hollow Section S355,
answered.
Common questions about the 193.7 x 6.0 Circular Hollow Section S355 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 29.1 kg per linear metre, so a tonne is approximately 34.4 metres. A 6 m length comes to about 175 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 193.7 x 6.0 Circular Hollow Section S355