26.9 x 3.0 Circular Hollow Section S235
Rolled and welded as a circular hollow section, the 26.9 x 3.0 Circular Hollow Section S235 combines structural efficiency with a clean visual line. The trade-off is connection: circular ends need profiling, coping or a flange plate rather than a simple flat bolted joint, so fabrication cost is higher than for an equivalent open section.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 1.77 kg per metre, one tonne buys roughly 565 linear metres. At this weight the section is a genuine two-person lift over short distances, so it suits refurbishment work, tight access and sites without craneage. Held in S235 to BS EN 10210 / BS EN 10219 and cut to length before it leaves the yard. Mill certificates accompany every load, and any fabrication is executed under our BS EN 1090 EXC 3 factory production control.
Typically specified for roller and shaft sleeves, exposed architectural columns, handrails and balustrade posts, gantry and sign posts and tubular trusses.
Tube ends left open will collect water; specify cap plates or drain holes on anything exposed to the weather.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
26.9 x 3.0 Circular Hollow Section S235,
answered.
Common questions about the 26.9 x 3.0 Circular Hollow Section S235 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 1.77 kg per linear metre, so a tonne is approximately 565 metres. A 6 m length comes to about 11 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 26.9 x 3.0 Circular Hollow Section S235