3 x 20 x 0.47 kg Flatbar S275
3 x 20 x 0.47 kg Flatbar S275 is a mild steel flat measuring 3 × 20 mm, used as plate stock for splices, packers, gussets and flitch work. As a flitch plate sandwiched between timber, a flat bar adds substantial bending stiffness while keeping the finished member the same width as the joists either side of it.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 0.47 kg per metre, one tonne buys roughly 2127.7 linear metres. It sits at the lighter end of the range, which keeps handling costs down and lets small teams position members without mechanical lifting plant. Supplied in grade S275 to BS EN 10025-2, cut to your lengths and delivered worldwide. Heat numbers are traceable back to the rolling mill, with EN 10204 3.1 certificates issued against each delivery.
Typically specified for bracing straps, fabricated brackets, edging and trim to steelwork, timber flitch beams and splice and gusset plates.
Specify whether edges need to be deburred or bevelled; plates going into a visible position usually want both.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
3 x 20 x 0.47 kg Flatbar S275,
answered.
Common questions about the 3 x 20 x 0.47 kg Flatbar S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 0.47 kg per linear metre, so a tonne is approximately 2127.7 metres. A 6 m length comes to about 3 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 3 x 20 x 0.47 kg Flatbar S275