30 x 30 x 2.5 Square Hollow Section S235
The 30 x 30 x 2.5 Square Hollow Section S235 is a square hollow section measuring 30 × 30 mm — a closed box profile with four flat faces, giving tube performance with straightforward flat-to-flat connections. The closed box is far stiffer in torsion than any open profile of similar weight, so an SHS post carrying an offset load twists very little.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 2.03 kg per metre, one tonne buys roughly 492.6 linear metres. Light enough to be manoeuvred through existing openings, it is a common choice where a crane simply cannot reach the working face. Standard supply is S235 to BS EN 10210 / BS EN 10219, with fabrication carried out here before dispatch. Every order carries EN 10204 3.1 mill certification and is CE marked under BS EN 1090 EXC 3.
Typically specified for balustrade newel posts, machinery frames and skids, canopy and pergola structures, shop-front and glazing supports and architectural and exposed columns.
Mitre cuts for frames are set out here from your overall frame dimensions rather than piece lengths.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
30 x 30 x 2.5 Square Hollow Section S235,
answered.
Common questions about the 30 x 30 x 2.5 Square Hollow Section S235 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 2.03 kg per linear metre, so a tonne is approximately 492.6 metres. A 6 m length comes to about 12 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 30 x 30 x 2.5 Square Hollow Section S235