300 X 100 X 46.0 kg PFC Mild Steel Channel S355
The 300 X 100 X 46.0 kg PFC Mild Steel Channel S355 is a hot-rolled channel measuring 300 × 100 mm, with parallel inner flange faces so washers and plates seat flat without taper packs. Used in pairs either side of a timber member, channels form a very effective flitch arrangement without the through-bolting depth a plate would demand.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 45.5 kg per metre, one tonne buys roughly 22 linear metres. At this weight, lifting is a planned operation — allow for crane capacity, slinging points and safe laydown before the delivery arrives. Stock grade is S355 to BS EN 10025-2; other grades are rolled to order. Certification is EN 10204 3.1 as standard, and fabricated items are CE marked under BS EN 1090 EXC 3.
Typically specified for cladding and sheeting rails, flitch beams around timber, lift shaft framing, agricultural building purlins and kerb and trench edging.
Tell us which flange face must remain clear — we set out the drilling from that datum rather than from the section centreline.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
300 X 100 X 46.0 kg PFC Mild Steel Channel S355,
answered.
Common questions about the 300 X 100 X 46.0 kg PFC Mild Steel Channel S355 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 45.5 kg per linear metre, so a tonne is approximately 22 metres. A 6 m length comes to about 273 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 300 X 100 X 46.0 kg PFC Mild Steel Channel S355