356 x 171 x 57 kg Universal Beam S355
Rolled as a universal beam measuring 358.6 × 172.1 mm, the 356 x 171 x 57 kg Universal Beam S355 carries load in bending across a span rather than in axial compression. The web is thin relative to the flanges, so any large service penetration or a heavy point load over the bearing will need stiffening or a web-opening check.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 57 kg per metre, one tonne buys roughly 17.5 linear metres. At this weight, lifting is a planned operation — allow for crane capacity, slinging points and safe laydown before the delivery arrives. Held in S355 to BS EN 10025-2 and cut to length before it leaves the yard. Mill certificates accompany every load, and any fabrication is executed under our BS EN 1090 EXC 3 factory production control.
Typically specified for crane gantry runway support, floor and roof beams, portal-frame rafters, opening lintels in load-bearing walls and transfer beams over removed walls.
Beams are supplied with square-cut ends as standard; end plates, cleats, notches and bolt holes are drilled to your detail before delivery.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
356 x 171 x 57 kg Universal Beam S355,
answered.
Common questions about the 356 x 171 x 57 kg Universal Beam S355 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 57 kg per linear metre, so a tonne is approximately 17.5 metres. A 6 m length comes to about 342 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 356 x 171 x 57 kg Universal Beam S355