40 x 40 x 4 Mild Steel Equal Angle S275
The 40 x 40 x 4 Mild Steel Equal Angle S275 is an L-section measuring 40 × 40 mm with matched legs, commonly cut short and used many times over on the same job. Connected through one leg only, an angle carries load eccentrically. Codes handle this with a reduced effective area, so a single-bolt cleat is worth checking rather than assuming.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 2.42 kg per metre, one tonne buys roughly 413.2 linear metres. Light enough to be manoeuvred through existing openings, it is a common choice where a crane simply cannot reach the working face. Stock grade is S275 to BS EN 10056-1; other grades are rolled to order. Certification is EN 10204 3.1 as standard, and fabricated items are CE marked under BS EN 1090 EXC 3.
Typically specified for masonry support and edge protection, lightweight trusses, frame stiffeners, shelving and rack framing and gate and railing fabrication.
For external work, hot-dip galvanising after cutting and drilling avoids exposing bare steel at every hole.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
40 x 40 x 4 Mild Steel Equal Angle S275,
answered.
Common questions about the 40 x 40 x 4 Mild Steel Equal Angle S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 2.42 kg per linear metre, so a tonne is approximately 413.2 metres. A 6 m length comes to about 15 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 40 x 40 x 4 Mild Steel Equal Angle S275