42.4 x 2.5 Circular Hollow Section S235
42.4 x 2.5 Circular Hollow Section S235 is a CHS, a seamless-looking tubular member equally stiff in every direction. The trade-off is connection: circular ends need profiling, coping or a flange plate rather than a simple flat bolted joint, so fabrication cost is higher than for an equivalent open section.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 2.46 kg per metre, one tonne buys roughly 406.5 linear metres. At this weight the section is a genuine two-person lift over short distances, so it suits refurbishment work, tight access and sites without craneage. Supplied in grade S235 to BS EN 10210 / BS EN 10219, cut to your lengths and delivered worldwide. Heat numbers are traceable back to the rolling mill, with EN 10204 3.1 certificates issued against each delivery.
Typically specified for canopy supports, bracing in exposed frames, roller and shaft sleeves, exposed architectural columns and handrails and balustrade posts.
Tube ends left open will collect water; specify cap plates or drain holes on anything exposed to the weather.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
42.4 x 2.5 Circular Hollow Section S235,
answered.
Common questions about the 42.4 x 2.5 Circular Hollow Section S235 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 2.46 kg per linear metre, so a tonne is approximately 406.5 metres. A 6 m length comes to about 15 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 42.4 x 2.5 Circular Hollow Section S235