50 x 50 x 5 Mild Steel Equal Angle S275
The 50 x 50 x 5 Mild Steel Equal Angle S275 is an L-section measuring 50 × 50 mm with matched legs, commonly cut short and used many times over on the same job. Used in pairs either side of a gusset, angles become far more efficient because the eccentricity largely cancels out.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 3.77 kg per metre, one tonne buys roughly 265.3 linear metres. At this weight the section is a genuine two-person lift over short distances, so it suits refurbishment work, tight access and sites without craneage. Stock grade is S275 to BS EN 10056-1; other grades are rolled to order. Certification is EN 10204 3.1 as standard, and fabricated items are CE marked under BS EN 1090 EXC 3.
Typically specified for gate and railing fabrication, corner and nosing trims, cross-bracing, cleats and connection angles and masonry support and edge protection.
Where angles are used as cleats, send us the hole pattern rather than the finished drawing — the cutting list is what we work from.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
50 x 50 x 5 Mild Steel Equal Angle S275,
answered.
Common questions about the 50 x 50 x 5 Mild Steel Equal Angle S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 3.77 kg per linear metre, so a tonne is approximately 265.3 metres. A 6 m length comes to about 23 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 50 x 50 x 5 Mild Steel Equal Angle S275