533 x 210 x 82 kg Universal Beam S355
Rolled as a universal beam measuring 528.3 × 208.8 mm, the 533 x 210 x 82 kg Universal Beam S355 carries load in bending across a span rather than in axial compression. Deflection, not stress, is very often the limiting case for a beam of these proportions, so the serviceability check tends to decide whether this size is adequate.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 82 kg per metre, one tonne buys roughly 12.2 linear metres. Sections this heavy are usually part of a primary load path, so mill certification and dimensional tolerance matter as much as the section size itself. Held in S355 to BS EN 10025-2 and cut to length before it leaves the yard. Mill certificates accompany every load, and any fabrication is executed under our BS EN 1090 EXC 3 factory production control.
Typically specified for crane gantry runway support, floor and roof beams, portal-frame rafters, opening lintels in load-bearing walls and transfer beams over removed walls.
If the beam is to be encased or fire-protected, tell us at order stage so surface finish and coating are compatible with the protection system.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
533 x 210 x 82 kg Universal Beam S355,
answered.
Common questions about the 533 x 210 x 82 kg Universal Beam S355 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 82 kg per linear metre, so a tonne is approximately 12.2 metres. A 6 m length comes to about 492 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 533 x 210 x 82 kg Universal Beam S355