65 x 50 x 5 Mild Steel Unequal Angle S275
The 65 x 50 x 5 Mild Steel Unequal Angle S275 is an asymmetric L-section measuring 65 × 50 mm, with the longer leg carrying most of the section's bending capacity. As with any angle, connecting through one leg introduces eccentricity, and the asymmetry makes it more pronounced in the weaker direction.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 4.16 kg per metre, one tonne buys roughly 240.4 linear metres. At this weight the section is a genuine two-person lift over short distances, so it suits refurbishment work, tight access and sites without craneage. Stock grade is S275 to BS EN 10056-1; other grades are rolled to order. Certification is EN 10204 3.1 as standard, and fabricated items are CE marked under BS EN 1090 EXC 3.
Typically specified for kicker and toe plates, asymmetric framing, shelf and ledger angles, roof and truss members and plant and equipment supports.
Mark the long leg on your drawing; we can hard-stamp orientation on each piece so it cannot be fitted the wrong way round.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
65 x 50 x 5 Mild Steel Unequal Angle S275,
answered.
Common questions about the 65 x 50 x 5 Mild Steel Unequal Angle S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 4.16 kg per linear metre, so a tonne is approximately 240.4 metres. A 6 m length comes to about 25 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 65 x 50 x 5 Mild Steel Unequal Angle S275