75 x 75 x 10 Mild Steel Equal Angle S275
The 75 x 75 x 10 Mild Steel Equal Angle S275 is an equal-leg angle measuring 75 × 75 mm — an L-profile with both legs the same length, giving symmetric stiffness in the two obvious directions. Used in pairs either side of a gusset, angles become far more efficient because the eccentricity largely cancels out.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 11.11 kg per metre, one tonne buys roughly 90 linear metres. At this weight the section is a genuine two-person lift over short distances, so it suits refurbishment work, tight access and sites without craneage. Standard supply is S275 to BS EN 10056-1, with fabrication carried out here before dispatch. Every order carries EN 10204 3.1 mill certification and is CE marked under BS EN 1090 EXC 3.
Typically specified for frame stiffeners, shelving and rack framing, gate and railing fabrication, corner and nosing trims and cross-bracing.
Where angles are used as cleats, send us the hole pattern rather than the finished drawing — the cutting list is what we work from.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
75 x 75 x 10 Mild Steel Equal Angle S275,
answered.
Common questions about the 75 x 75 x 10 Mild Steel Equal Angle S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 11.11 kg per linear metre, so a tonne is approximately 90 metres. A 6 m length comes to about 67 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 75 x 75 x 10 Mild Steel Equal Angle S275