90 x 90 x 5.0 Square Hollow Section S235
The 90 x 90 x 5.0 Square Hollow Section S235 is a square hollow section measuring 90 × 90 mm — a closed box profile with four flat faces, giving tube performance with straightforward flat-to-flat connections. Flat faces make connections much simpler than on circular tube: plates, cleats and brackets weld or bolt straight on without profiling.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 13.3 kg per metre, one tonne buys roughly 75.2 linear metres. At this weight the section is a genuine two-person lift over short distances, so it suits refurbishment work, tight access and sites without craneage. Standard supply is S235 to BS EN 10210 / BS EN 10219, with fabrication carried out here before dispatch. Every order carries EN 10204 3.1 mill certification and is CE marked under BS EN 1090 EXC 3.
Typically specified for balustrade newel posts, machinery frames and skids, canopy and pergola structures, shop-front and glazing supports and architectural and exposed columns.
Closed sections need vent holes before hot-dip galvanising; tell us if the position is visually sensitive.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
90 x 90 x 5.0 Square Hollow Section S235,
answered.
Common questions about the 90 x 90 x 5.0 Square Hollow Section S235 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 13.3 kg per linear metre, so a tonne is approximately 75.2 metres. A 6 m length comes to about 80 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 90 x 90 x 5.0 Square Hollow Section S235