180 X 75 X 20.0 kg PFC Mild Steel Channel S275
The 180 X 75 X 20.0 kg PFC Mild Steel Channel S275 is a hot-rolled channel measuring 180 × 75 mm, with parallel inner flange faces so washers and plates seat flat without taper packs. The flat back is the practical attraction: it sits tight against masonry, timber or another steel face, which makes the channel the natural choice for trimmers and edge beams.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 20.3 kg per metre, one tonne buys roughly 49.3 linear metres. It is heavy enough to need mechanical handling on site, but light enough that a standard HIAB offload covers delivery in one visit. Stock grade is S275 to BS EN 10025-2; other grades are rolled to order. Certification is EN 10204 3.1 as standard, and fabricated items are CE marked under BS EN 1090 EXC 3.
Typically specified for cladding and sheeting rails, flitch beams around timber, lift shaft framing, agricultural building purlins and kerb and trench edging.
Channels used as stringers are often notched at the landing — send the setting-out and we will cut it here.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
180 X 75 X 20.0 kg PFC Mild Steel Channel S275,
answered.
Common questions about the 180 X 75 X 20.0 kg PFC Mild Steel Channel S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 20.3 kg per linear metre, so a tonne is approximately 49.3 metres. A 6 m length comes to about 122 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 180 X 75 X 20.0 kg PFC Mild Steel Channel S275