25 x 40 x 7.85 kg Flatbar S275
25 x 40 x 7.85 kg Flatbar S275 is a mild steel flat measuring 25 × 40 mm, used as plate stock for splices, packers, gussets and flitch work. Used as a splice or gusset, thickness and hole layout are the critical dimensions; the plate must be at least as strong as the members it joins.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 7.85 kg per metre, one tonne buys roughly 127.4 linear metres. At this weight the section is a genuine two-person lift over short distances, so it suits refurbishment work, tight access and sites without craneage. Supplied in grade S275 to BS EN 10025-2, cut to your lengths and delivered worldwide. Heat numbers are traceable back to the rolling mill, with EN 10204 3.1 certificates issued against each delivery.
Typically specified for splice and gusset plates, base and cap plates, packers and shims, stiffeners to existing steel and bracing straps.
For flitch plates, drill on site only as a last resort — accurate shop drilling keeps the bolt group true through both timbers.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
25 x 40 x 7.85 kg Flatbar S275,
answered.
Common questions about the 25 x 40 x 7.85 kg Flatbar S275 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 7.85 kg per linear metre, so a tonne is approximately 127.4 metres. A 6 m length comes to about 47 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 25 x 40 x 7.85 kg Flatbar S275