457 x 152 x 74 kg Universal Beam S355
457 x 152 x 74 kg Universal Beam S355 is a universal beam measuring 461.3 × 152.7 mm, the workhorse profile for horizontal spans where depth can be traded against weight. The web is thin relative to the flanges, so any large service penetration or a heavy point load over the bearing will need stiffening or a web-opening check.
Drilling, Finishing and Beam Rename
No beams to fabricate yet.
Cutting Plans & Visualisation
Reference Images
At 74 kg per metre, one tonne buys roughly 13.5 linear metres. At this weight, lifting is a planned operation — allow for crane capacity, slinging points and safe laydown before the delivery arrives. Supplied in grade S355 to BS EN 10025-2, cut to your lengths and delivered worldwide. Heat numbers are traceable back to the rolling mill, with EN 10204 3.1 certificates issued against each delivery.
Typically specified for steel-framed extensions, garage and carport openings, crane gantry runway support, floor and roof beams and portal-frame rafters.
Beams are supplied with square-cut ends as standard; end plates, cleats, notches and bolt holes are drilled to your detail before delivery.
Services for this section
Cut, drilled, certified, delivered
- Cut to length, drilled and notched
- BS EN 9606-1 coded welding
- CAD detailing and connection design
- CE Declaration of Performance
- worldwide delivery with HIAB offload
- Live structural steel prices
- Request a quote (24-hour response)
- Speak to the sales team
Browse other categories
Other structural steel sections
FAQs
457 x 152 x 74 kg Universal Beam S355,
answered.
Common questions about the 457 x 152 x 74 kg Universal Beam S355 — weight, grade, cut-to-length and worldwide delivery.
- It weighs 74 kg per linear metre, so a tonne is approximately 13.5 metres. A 6 m length comes to about 444 kg. Use the figure for lifting plant selection and for pricing, since structural steel is sold by weight.
Ready to order | 457 x 152 x 74 kg Universal Beam S355